Jump to content

TX30 RAW files "unseen" (help)


cinsoozy

Recommended Posts

Hello folks! 😊

So far no one has been able to help on this...I have a new XT30 (updated) and a Macbook (which I just updated when this problem occurred but the update didn't help).  I have RAW & Fine set in the camera and PC Connection mode set at "USB RAW/Conv.".....and the MAC only "sees" the .jpg.  Not RAW.  😣

Camera store and so far online don't seem to have answer to somehow get the RAW seen so I can work with it..  Anybody out there have any suggestions or experiences?

Cindy

Link to post
Share on other sites

Change the connection setting -> pc connection mode -> to USB CARD READER

make sure this is saved. Then connect your X-T30 to your computer via the usb-c cable and then turn the camera on. Use Apple’s Image Capture app (in the applications folder) to copy the images to your MacBook.

The setting you have chosen is used by Fuji’s software to convert raw images to jpg.

Link to post
Share on other sites

So just to double check, 

this is what your X-T30 is showing:

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

And when you connect it to your MacBook, you get this:

but when you open Apple's Image Capture application you are not seeing something like this:

?

Edited by jerryy
Link to post
Share on other sites

Hmm, can you do a quick check of two things?

Pull the card out of your camera, put it into a usb card reader and connect that to your MacBook

1.)  It should mount as an external drive, double click it and make sure that you have both the .jpg and .raf files listed.

2.) Open Image Capture again and select the card and see if both the .jpg and .raf files are listed.

BTW, earlier I mentioned using a usb-c cable, thunderbolt cables also work.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...