Search the Community
Showing results for tags 'usb'.
Found 8 results
-
Just got an X-T10 and looking for a way to shoot tethered to Capture One 9 on a Mac. Noticed some old posts from awhile back but figure there must be something in the works. I understand it's more of a street camera but looking into it's capabilities to replace my Canon. I don't use Light Room but will if I have to set up a Hot Folder or whatever. Thx.
-
I have recently bought X100F and use card reader only the first time. Now i tried the usb cable that was shipped with the camera. It charged the camera but it didn't connect. Because i have had this issues before with other things, i can give my solution. 1. It is rarely a driver issue, don't go there first! 2. Use a good thick cable with a RF-filter on. It wasn't on the cable i got but it is a cable with a visible outgrowth, usually on one side only. 3. Don't use a USB3. Use USB2.0 (the one without the blue inside) 4. Don't connect to monitor or a hub. Connect directly to MAC/PC/Laptop 5. Connect to camera first, then to PC and last turn on the camera. And reverse this order when the camera is going to be de-attached. I hope it helps! -
Hi Wondering if some of you know of a good, reliable USB charger for the NP-95 battery. Need one to charge NP-95s from a battery pack, for those times when access to power outlets is limited or unavailable. (I use the X100S so I can't charge through the camera itself) Thanks in advance Th -
I have a X-PRO2. I want to shoot tethered. But when I connect it to my Mac via USB I get the message: PC SHOOT MODE IS INCORRECT - CHANGE PC SHOOT MODE TO USB AUTO AT THE SETUP-CONNECTION SETTING OF THE CAMERA But when I go to the SETUP menu, and then to the CONNECTION SETTING menu there is no USB setting. There is WIRELESS SETTINGS, PC AUTO SAVE SETTING, GEOTAGGING SET-UP and instax PRINTER CONNECTION SETTING but no USB. The firmware says BODY VERSION 3.00 Would a firmware upgrade solve this problem ? Image Capture on my MacBook sees the camera, so the USB cable is making a connectioin. Thanks, Angelo -
I have my X100F and I want to directly import the image (RAF format) using CaptureOne12 Express Fuji directly from the camera using USB cable. I mean, without having to take out the SD card from the camera. Currently only MacOSX Photo app that can directly detect the camera, but it cannot detect RAW format. Is that possible? If so what's the way to do it? -
Hey guys! So I just updated my X-T3 to the firmware Ver.4.00 and I can't charge the camera via my USB-C Apple wall plug. No green light on the back of the camera but the white plug symbol does appear when plugged in. The only time when the X-T3 is charging via USB is when the camera is turned OFF and connected to my MacBook Pro or Powerbank. Does anyone else experience this problem?
-
Can someone explain the difference between MTP(PTP), PC SHOOT AUTO and PC SHOOT FIXED? Thanks.
-
Fujifilm X Acquire app doesn't detect my X-T30 camera. I activated Auto USB but it doesn't work. I tried restarting.
