Search the Community

I Just got a Fuji X-T3 from Amazon Warehouse deals, and the button feels off... I used a X-T1 and have a X-t2 and they both feel very different to the X-T3. I made a video to ask if this is how the X-T3 works or if I got a "faulty" unit.

Hi, I've just been on vacation and took my camera with me, during my trip I noticed that my camera started over exposing my shots in a bad way. Even though the light meter indicated that the photo was correctly exposed the photo would come out completely white. After further tests I realised the problem appeared to be on shutter speeds over 500. Thankfully I switch to the electronic shutter and this worked fine allowing me to keep taking photos for the rest of the trip. Having recently come back I also noticed that the camera fails to trigger my flash when directly connected or via a Cactus trigger. I'm going to contact Fuji tomorrow but I'm interested if anyone else has experienced or heard of these problems? Thanks, Steve

Hello, My shutter has been stuck at 1/500 and I can't change it. I can move the shutter wheel, but shutter in camera doesn't do anything. I have been trying rotating wheel in front but that doesn't help. Anyone got any experience with this ? thanks.

Hi guys, I'm new in the forum. Have had an x100s for almost 4 years and I always loved it. It has always been my travel camera. But I always found a limitation to it and I thought bigger and more professional Fuji cameras wouldn't have it. For my professional work (fashion/advertising/food photography) I was using a nikon D800e (always been a nikon photographer, until my x100s made me think about it). Recently, I traded my nikon gear (body and three lenses) for a Fuji xt1 gear with a friend (two bodies, three lenses). NOW, I find something majorly dissapointing: I need the shutter button to hold a focus lock when kept half pressed after the first shot. further explanation? I focus on a subject with a half press of the shutter (most cameras in the world will give you a beep sound to check that focus was acquired, something else I'm missing in the Fuji) and then I either recompose or just stay with the same framing, but I continue pressing the shutter many times to get many shots, always lifting my finger enough for the new shot, but not so far to unpress completely. So I keep the Half-press and the focus stays locked in the first setting (the first time I pressed)... Xt1 fails to do this and the only solution I've found so far is to use the Back Button AF-L. This could work, but why use two buttons when it could be just one (and it could have a beep for focus acquisition). Does this bother anyone else? Also, lastly, anyone knows if the xt2 or the xpro2 behave the same way? According to this video xpro2 has a system like I want, but can someone confirm this? Cause if its like this, I'm switching one xt1 to the xpro2. Xt2 maybe too? Thanks guys, and I really hope this could appear in the future in firmware updates. All the best to all Sergio Miranda www.sermiranda.com

Hello there, as I use my X70 mainly for street phtography I often shoot in continuous low mode. After a short day of shooting I've easily done 3000+ exposures. For how many releases was the X70's shutter designed? Thanks for your information & best regards, Manfred

today while shooting, my xt3 had a shutter delay, it did nothing when i pressed the shutter, but only took a shot when i released the shutter, it only happened twice, and im using some vintage manual focus lenses so no focus/release priorities, any clue?

How do I set my xt20 so I can hold it halfway and adjust the focus? Also, the shutter is so sensitive that I end up taking pictures when I turn the camera on and off. Am I doing something wrong in my settings? thanks mary

Hi there. I wonder if someone had a mechanical shutter failure in his or her X-T1 ? Mine is ok for now but im curious for how long it will be alive. Greetings

Hi All! I am an owner of a X-H2 and some xf lenses an in passion with photography since many years. I tried out to go beyond 1/8000s in all configuration but it does not work. It ends at 1/8000s and the ES doesn‘t activate and jumps beyond. If I‘m using the ES online, it works like described. Using the X-T3 for example with same settings it works only with setting „T“ on the Shutter Speed Dail. OK, most problems occoure behind the camera body 🤣, so what am I doing wrong? Thnx!!!!🙏 Regards, Sascha

I just want to ask. Is it normal to shoot with shutter speed 1/60 and iso 10.000. Cuz when I lower the iso the photo gonna be dark. Or is it something wrong with my camera

Hi. My lovely X-E3 has a problem. Sometimes when I press the shutter (fully press it, to take a photo!) there is a significant delay before the shutter fires. A delay of around 1.5 seconds. Enough to miss the shot, should my subject happen to be on the move. I am using mostly the 18mm f/2. I have tested the lens on a borrowed X-Pro1 and it works 100% - so it's not the lens. I think the problem happens around 25% of the time, enough to be very annoying. Has anyone else experienced something like this before? If so, what did you do about it? Thanks.