airbusky

Thanks Jorge, Your post made me take a close look at the back of the lens.👍

It appears that I have solved the problem. A very small piece of debris was found in the receiving hole for the locking pin on the lens. The lens now operates normally and locks to the camera. I hope this may help someone else on the forum.

Thanks Jorge, I checked all of the screws and they are tight. I have now discovered that the lens is looseing contact with points if rotated all the way onto the camera. Rotating it back just a bit will put the lens back into operation. The lens is still not locking onto the body. I have had this lens for years with moderate and careful use. Disappointing. My other prime lens works fine on the body so I agree that it is the lens. Any repair shop recommendations? I'm on the west coast.

Was just shooting this morning with my 18-55 and XT-20 and all was well. Picked it up this afternoon and screen was grayed out and showing f 0. Checked the lens and it is not locked to the body. Tried another lens (23 F2 WR) and everything works fine. 18-55 still will not lock to the camera and is not functioning. Any ideas? Thanks

Yes it will, just tested the RR-90 on my X-T20 in BKT. All three exposures were taken. The remote app just triggers a single shot when BKT is selected on the drive control.

Hello All, New to the Fuji X system with an X-T20. Previous Camera Canon 5D Mk II. I have been getting excellent results with hand held photography but my first outing with a tripod has me wondering. All of my images from my tripod testing are not sharp. Using an X-T20 the 18-55 lens, mechanical shutter, high f stops, OIS off and the same tripod used with the 5D. Using back button focus, bracketing +/- 2 stops and using the 2 sec timer. This technique worked fine with the 5D in the Live View mode. Shutter shock from the mechanical shutter?