sandroamt

I own a Nikkor 85mm f/2 ai. There is some little spherical aberrations at f/2; Pretty usable from f/2.8 good from f/4 to f/8; a little diffraction starts to be from f/11 I use it with x-t10 so 16Mp... I've no idea how it behave with 24Mp sensors!

Thanks a lot for your useful information! I'll give it a try

hello aceflibble, would you kindly point me to some third party macro extension tube for fuji x series you successfully did try? I saw this: http://www.amazon.com/product-reviews/B014EV3Q4W/ but I scared due to awful user review! thanks Sandro

You are not following the instruction you can find in the same place where you downloaded the firmware

Just guessing... it could be related to the phase vs contrast focus: phase focus may NEED full open in order to differentiate light arriving to the sensor from different directions I did try: camera on tripod aiming at a window whith some object in the dark; if you use the spot in the central area (phase detect) aiming the spot at the dark object, to check the focus the display overexposes. After I turned a little bit the camera and I shifted the spot focus to a lateral zone (contrast detect) aiming the spot at the same dark object and now checking the focus the display do not overexposes.

2. same problem here... I answer in your other thread too... 3. shutter speed can be changed if not set to Auto (main speed dial set +/- something or setting the main speed dial to T full-range of time or so...)... locked function (not customizable) for turning it! (I use iso for that fn button... but THE fn button is "the PRESSING" not "the turning" ) Let me add that so you have overloaded functions to the same dial: just turn and change shutter speed; press+turn and change the ISO

Same slow down problem here but I didn't try extensively before the update! Anyone know if it is possible AND safe to downgrade to an old firmware? (I saved various update somewhere in the computer! I miss only the stock firmware) my "numbers: xt-10 latest firmware (9 june 2016) xc-16-50 latest firmware (9 june 2016) mechanical shutter speed 1/250 ISO 400 Dynamic Range 100 F3.5 Face Detect OFF Auto focus ON Spot Autofocus Auto focus settings c-autofocus priority -> release (this can make some difference too) SanDisk micro SD + adapter to SD 16 GB HC1 Class 10 RAW+F+L3:2 => 7 fast shots + last 8th shot about a second after I released the shutter due to the slow-down

Original fuji full manual pag. 41 (Q-menu); pag 42 (Fn buttons); pag. 85 (all possible custom profile settings) Anyway, this one it is a useful quick guide thanks!

I've just updated both my x-t10 and my lens firmware and I've noted... no particular sensible "enhances the accuracy of Manual focus adjustment" but surely I'm an insensible dumb For the "improvement of OIS function" I'm not able to judge because I forgotten to do some OIS trial just before the update! Anyway for the next firmware update, I would like, when using the "self timer", if you use the single auto-focus, then the camera should focus just when you press the shutter button (as already she do...); BUT if you use the continuous auto-focus then it could be nice to focus merely continually or at least just before shooting and NOT when you press the shutter button (currently the continuous auto-focus is disabled when using the self timer) Note: the "interval timer shooting" (time-lapse) already behave in a similar way but the minimum "start waiting time" is 0 or 1 minute so either you have to wait too much or take a "fake first shoot"

old thread... I know, but hope you are still following: where did you find the "right camera ICC" you mentioned? I searched for a while but don't seems fujifilm provide it, it does? (I'm looking for x-t10 and x-t1 ICC) regards Sandro