Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 09/21/2020 in all areas

  1. Herco

    X-Pro 2 or X-Pro 3

    The size of the photocells in the 24Mp sensor is approx. 8% larger than in the 26Mp. The gain differs about 20% so there is certainly an advantage for the 26Mp sensor. However, with higher gain there's also slightly higher noise. To correct that, the NR profile of the 26Mp is slightly different. The end result is barely visible in real live low light RAWs (in Capture One). That coincides with the Sony specs for the sensors. Both 24Mp and 26Mp sensor are from Sony and the 26Mp in Fuji is the same sensor as the 61Mp in the A7RIV and in the GFX100. Only cut to a different size.
    1 point
  2. Herco

    X-Pro 2 or X-Pro 3

    There's a lot of misconception re. the sensor generations Fuji uses. In essence there's no visible image quality difference between the 24Mp X-TransIII/Processor and the 26Mp X-TransIV/Processor. The 2Mp are negligible. There's virtually no visible difference in low-light performance as well. The BSI (back-side illuminated) technology of the 26Mp sensor has a theoretical advantage here because the metal wiring layer is not on top of the photocells, but beneath them. However, the photocells of the 24Mp are larger and therefor the yield of the 26Mp BSI-sensor is lower than the 24Mp FSI sensor (front-side illuminated). That glitches out almost all advantages here. What does make a difference is the number of AF pixels on the 26Mp sensor (much higher) and the shorter circuits due to the BSI technology of the 26Mp sensor. That allows for greater throughput capacity and quicker AF. Top that with a more powerful processor in the 26Mp camera's and you have snappier AF and higher video bit rates (up to 400 Mbps). The main differences between the x-pro2 (I'm a long-time owner) and the x-pro3 (tried it extensively) are the LCD screen and the viewfinder. The hidden LCD screen could be very beneficial to a street shooter (from the hip). However, imo it sucks to have to open it for menu access and menu access through the EVF is cumbersome when you wear glasses (and have thumbprints all over them). I prefer a screen like the X100V were the user has options to choose how to use it and which is nicely integrated in the body. The sub monitor is imo a useless gadget as there's not backlighting button like on the X-H1/GFX50S. The viewfinder for me is the real dealbreaker on the X-Pro3. Though it is larger and brighter, in OVF mode (which is why I bought the X-Pro) there's only one magnification left (x0.50) rather than the 2 magnification levels of the X-Pro2. That renders the X-Pro3 in OVF mode useless for lenses shorter than 23mm and longer than 35mm. I can't use my 16/18mm and my beloved 50mm anymore on the X-Pro3 in OVF unless I settle with a very tiny frame or frame lines outside my OVF. For now I'm sticking to the X-Pro2.
    1 point
×
×
  • Create New...