Jump to content

Affordable 135 for portraits.


Recommended Posts

I have MINOLTA MD TELE ROKKOR 135MM F2.8 which cost me $80 on eBay, however in order to pair it with Fuji-X camera you need an adapter. There are two options - plain adapter (without glass) may be about $30 - $100 which multiply the focal length by 1.5 so you'd have 200mm and so called Focal Reducer which gives you original focal length and even one additional stop of light - 135mmf2 in my case, but it will cost you about $100 - $500. I have Metabones Speed Booster ULTRA 0.71x ($450). Cheaper Chinese adapters (~$100-$200) may or may not provide an acceptable IQ.

Link to post
Share on other sites

  • 4 months later...

I use the Nikon 135mm f3.5 Ai with Metabones adaptor on my X-t2. Great lens, build like a tank. Can be had for EUR 85,= (in the Netherlands) in minty shape.

The Nikon 135mm f2.8 is slightly better but is bit more expensive like about EUR 120-150,= 

Link to post
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...