Jump to content

Failed to Write to Card error


KateB

Recommended Posts

Have you experienced this error?

 

I was shooting this morning, single shots and kept getting an error message saying Failed to Write to Card.

 

Those images were not saved to disk.

 

Any ideas?

Edited by KateB
Link to post
Share on other sites

Did you try formatting the card?

 

I usually go out take photos, get back to computer upload and then format the card. It is ready then to go next time.

 

If you do similar, and then got this issue, I would bin the card.

Link to post
Share on other sites

The only time I format a card is on first use, or after firmware updates, and always in the camera.

 

The rest of the time I move the photograph files from the card to my computer, either via a usb cable, or far more often by removing the card and placing it in a usb card reader.  Then the card is empty, and ready to go.  No need to format it .

Link to post
Share on other sites

Did you try formatting the card?

 

I usually go out take photos, get back to computer upload and then format the card. It is ready then to go next time.

 

If you do similar, and then got this issue, I would bin the card.

I have tried that (in camera), so far so good.

Link to post
Share on other sites

I had a similar problem with my XT-20. I tried with 4 different cards and the problem still existed. I ended up sending the camera to service, where Fuji changed the main board.

 

That was unfortunate to have such an issue. I must have been lucky with cameras (says he touching wood) but I suppose it is good to know that when a problem persists of that type it could be what I would call a serious repair is needed.

Link to post
Share on other sites

The camera can only do a "Quick Format" - this means that it removes the directory and writes a new empty one - it does not delete anything or read the whole card . You can let the camera do the Quick Format so it matches Fuji's firmware 100%. But from time to time or when experiencing problems it is a good idea to have your computer do a complete format (slow) - this way it actually goes through and make sure that all the storage space is addressable. 

Link to post
Share on other sites

  • 1 month later...

The only time I format a card is on first use, or after firmware updates, and always in the camera.

 

The rest of the time I move the photograph files from the card to my computer, either via a usb cable, or far more often by removing the card and placing it in a usb card reader.  Then the card is empty, and ready to go.  No need to format it .

 

INCORRECTO!  LOL.  Sorry. You "should" format the card in camera once you have the images on your machine, and are backed up.

Potentially this will eliminate or nip in the bud any potential errors lurking in a bad FAT area of the card that won't be noticeable until you get the error the OP got.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...