Jump to content

Newbie Canon to Fuji


geejays

Recommended Posts

Hi there,

Just joined the Forum and will be interested to see how it goes. I p/x'd some of my canon gear for an X-Pro2 about a year ago and am very pleased with it. Then bought an XT2 with grip and a couple of long zooms. Generally very pleased with the change of gear which mostly matches my change of photographic interest. The size and picture quality certainly outweigh the couple of issues I have found in still trying to shoot nature/ wildlife. I am however adjusting my shooting style and am getting used to the change in functionality. Once the faults in my gear have been sorted under warranty I will be fully back in action. Just wish the support was a bit more switched on. Cannot compare with Canon on this front with personal experience however, but a friend had awful issues getting problems on his new Canon sorted out. Hopefully Fuji are better.

I accept problems with new items of any sort but what makes for a good manufacturer to my mind is the quality of their support when problems arise. I look forward to a successful outcome with my faulty Fuji gear.

Link to post
Share on other sites

  • 3 weeks later...

Hello.

 

I made a similar jump just a handful of months ago -- from Canon 6D to the X-T2. The Canon was fine enough - good image quality in a solidly built frame, but I found that I would rarely grab it due to size and the weight of the brick-ish L lenses I bought in a rush of neophyte enthusiasm. The X-T2 is such a lovely and inviting little creation I find that I always want to reach for it. My only gripe is that I underestimated just how much more battery power the EVF was going to use compared to a dslr's OVF. But, as you say, there's always something.

Link to post
Share on other sites

Hello geejays and F_J_Woods,

 

I am a newbie here and have the X-T2. I have been shooting with the Canon 1Dx Mark II. I am very impressed with the image quality of the X-T2. I also noticed the battery life can be a problem. I have 9 batteries because I like to do winter photography. I am worried about the batteries and extreme cold. The thing that is keeping me from making a full commitment to Fuji is that I have had very little success in shooting birds in flight. I have the Fuji 100-400 lens, 1.4 extender and the power grip. I think I need someone to help me setup the menu properly. Do any of you have the info I need or could you direct me to a place that can help. All I have seen is setting  up for car races or tennis. Nothing with wildlife or birds in particular.

Link to post
Share on other sites

Hello geejays and F_J_Woods,

 

I am a newbie here and have the X-T2. I have been shooting with the Canon 1Dx Mark II. I am very impressed with the image quality of the X-T2. I also noticed the battery life can be a problem. I have 9 batteries because I like to do winter photography. I am worried about the batteries and extreme cold. The thing that is keeping me from making a full commitment to Fuji is that I have had very little success in shooting birds in flight. I have the Fuji 100-400 lens, 1.4 extender and the power grip. I think I need someone to help me setup the menu properly. Do any of you have the info I need or could you direct me to a place that can help. All I have seen is setting  up for car races or tennis. Nothing with wildlife or birds in particular.

Welcome!

 

I cannot speak to the X-T2's performance in low temperatures. I am originally from Southern California and get chill blains when temps fall below 50 Fahrenheit.

Link to post
Share on other sites

  • 3 weeks later...

Hello Fuji lovers. Joined this forum 2 days ago after reading/watching for last 2 months after I got my X-T20 with 18-55 mm XF lens. Up to that point I had been using Nikon D7100. Yesterday I finally traded my entire Nikon equipment :-)

Needless to say that I am very happy w/ the simplicity of Fuji menu and wonderful quality of the images. Gave my Fuji a great test run by photographing Colorado mountains last month. I specially like the quality of JPEG images, SOOC, since I gave up on the complexity of RAW shooting and Lightroom. 

I hope to keep learning from this forum.

Thank you

Link to post
Share on other sites

Hello Fuji lovers. Joined this forum 2 days ago after reading/watching for last 2 months after I got my X-T20 with 18-55 mm XF lens. Up to that point I had been using Nikon D7100. Yesterday I finally traded my entire Nikon equipment :-)

Needless to say that I am very happy w/ the simplicity of Fuji menu and wonderful quality of the images. Gave my Fuji a great test run by photographing Colorado mountains last month. I specially like the quality of JPEG images, SOOC, since I gave up on the complexity of RAW shooting and Lightroom. 

I hope to keep learning from this forum.

Thank you

 

Yes welcome, I just sold my Leica M system and have the X-T2 and GFX50S, Fuji are really producing lovely gear the results speak for themselves.

Link to post
Share on other sites

  • 4 weeks later...

I too am having issues with moving wildlife. I got to the stage with my Canon gear where I could nail good bird in flight shots. Having difficulty replicating that with Fuji. I also feel I need to get my custom settings better adjusted. I am now photographing more butterflies and dragonflies and really miss the close focus of my Canon 100-400. The Fuji 100-400 doesn't focus nearly so close. I don't use a tube as I walk with my gear and like to be ready to shoot birds as well. Starting to find the 50-140 with extender is better (lighter as well). Will be interested to try the new 80 Macro with extender. 

 

In the end the customer service on my XT-2 and grip was superb. I had a contact person who called me and who I could email directly and get updates and progress reports and was able to work with him. They even updated the firmware whilst they had the camera (I did wonder if it had a 'fix' in it).

 

Now starting to experiment on portraits using a variety of old manual focus lenses and considering something like a 135 or 200 prime for my outdoor photography. I started with manual focus years ago and with focus peaking my hit rate is rapidly improving.

 

All new tools take a while to learn. It was the same with my Long Canon lenses when I first bought them. Long wildlife lenses are precision tools and each camera/ lens combination behaves differently. I have obtained some shots I am really pleased with on my Fuji. I am seriously considering The 200mm when it comes out. If it focusses close enough it could suit me very well.

Link to post
Share on other sites

  • 4 weeks later...

I recently (2 weeks ago) purchased the 55-200 mm lens. The results, as I can see are very sharp. Used it last week at the Everglades in Florida and I found that 200 mm is not long enough for photographing birds or alligators. Unfortunately Fuji does not offer an extension tube for this lens. Wonder why?

The next zoom lens, 100-400 mm is very pricey,  >$1700 and also bulky which defeats the whole purpose of mirror less system like Fuji. Any suggestions or alternatives will be appreciated. Thank you. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...