Jump to content

Recommended Posts

I noticed that besides the smaller magnification of the EVF in x pro 2 vs x-t2, there is also the matter of the EVF being TFT in x pro 2 and OLED in x-t2. But what is really the difference between the two, quality wise. I assume OLED is the best quality being a newer technology, but am I right to assume that?

Link to post
Share on other sites

The OLED is potentially able to do 100% Adobe RGB but so can other technologies. OLED can can do true Black but if the others can get "black enough" it may not matter.

 

My Samsung S2 tablet (9.7) scores around 98% with sumptuous blacks and it makes my shots look super but the specific calibration is 100% unknown. It is also getting replaced with a new model, hopefully w/o self-ignition and after-burners.

 

Back to reality - the X-Pro2 EVF does look "off" from time to time but I have not had a chance to investigate, the rear screen is spot on though.

Link to post
Share on other sites

So the x pro 2 having tft and xt 2 oled has nothing to do with the quality differences people rave about between the two cameras - besides the larger magnification on xt2?

 

The viewing experience on the T series trumps the Pro series, whether it's TFT or OLED.

 

If you've looked into both, you'd know. It doesn't matter so much whether it's TFT or OLED.

 

Not sure how newer generation OLED stand against time. The burn out issue like oscilik mention is real.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Posts

    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
    • I used this for the latest firmware no problems. https://fujifilm-x.com/en-gb/support/download/firmware/cameras/x-t2/
    • I was just about to point that out, in my defense. 
×
×
  • Create New...