Jump to content

X-T10 Settings are not stored.

verysame

By verysame
in Fuji X-T1 / Fuji X-T10

 Share

Recommended Posts

verysame Enthusiast

verysame

Posted
Posted

Hi there,

 

I'm noticing a strange behavior on my girlfriend's X-T10.

She likes to have the manual focus assist on Standard or Focus Peak, but often when she turns on the camera the focus assist is on Split.

The White Balance sometimes is off too. It's supposed to be on Auto, we changed it once to Custom, and now it happens that the camera starts with the Custom setting even if when she turned it off was on Auto.

 

I myself experienced a weird behavior with the front shutter dial. After changing the shutter with the Shutter Speed dial (the one on the top) I wanted to fine tune it using the front dial, but the shutter wasn't changing at all. I gave it another try tonight (we turned off camera for a few hours) and now is working as expected.

Is this an unusual behavior or, since we are both new to Fuji, we are missing some global settings we are supposed to set up somewhere in the menu?

 

Thanks for any help.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jerryy
      Fuji Flowers

      By jerryy · Posted

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      Daffodils (Appalachian) Eastern Red Bud
    • Greybeard
      How to turn OFF the wifi antenna

      By Greybeard · Posted

      Does it use wi-fi when you are not specifically attempting to transfer files?
    • Rupal
      How to turn OFF the wifi antenna

      By Rupal · Posted

      Hello dear Fujifolks - I come from 54 years of shooting Nikon cameras, and this is my first Fujifilm experience as I've just sold my Nikon D7200 in exchange for a tiny but endearing X-T20. Very pleased with it as it's so lightweight, but very well built. But takes some getting used to the menus and settings after Nikon's DSLR functional simplicity ! I'm working on it though and slowly coming to terms with the new system. My question for now is this: is there any way to turn OFF the wifi antenna in the camera ? I'm particularly wifi signal sensitive and have no intention of using that function as I do all my editing and printing on my PC. I've checked the wifi menu options but cannot find a simple wifi ON-OFF selector. Thanks for your help and I'll be back with more Q's when needed. Blessings to you all... 
    • LBAbrams
      pocket wizard and XT5?

      By LBAbrams · Posted

      Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • George_P
      Transfer X-T5 for PC wi fi...

      By George_P · Posted

      Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
×
×
  • Create New...