Jump to content

X-T10 AF point reset

Ketix

By Ketix
in Fuji X-T1 / Fuji X-T10

 Share

Recommended Posts

Ketix Newbie

Ketix

Posted
Posted

Hello everyone,

 

I got myself a Fujifilm X-T10 a couple of days ago and I just want to know if there is any way to reset the AF point with a button to the middle of the frame. I know this function is there on the Canon EOS 5D III, where you just press the joystick in to reset the AF to the middle point. I am not sure about it but I had an X-E1 some time ago for a few weeks and I think I could reset the AF point bi pressing the control wheel on the back of the camera.

Now, when I press the wheel on the back of the X-T10 it will reset the box size but not move the point to the middle. I'd like to have a quick way to reset my AF point so I know when I put the camera to my eye that there is my AF point waiting for me in the middle if I need to grab a quick shot. Right now if I use it somwhere near the corners I need to look for my AF point and sometimes it is just hard to find or in the worst location imaginable... fiddleing with the buttons to move it somwhere usable for my subject more often than not results in a missed shot. I just really got used to this function on the Canon 5D and I don't want to miss it on the Fuji, especially when there is some kind of half-reset with the press of the back wheel.

 

Please tell me that I just overlooked some menu point where you can set the camera up like this. Please. I'm already bummed that the wheel direction to change things like ISO cannot be inverted...

Link to post
Share on other sites
Ketix Newbie

Ketix

Posted
  • Author
Posted

Alright, I know it's not the gentlemans way to write a reply on ones own topic/question but I found the solution to my own problem. It seems that I was misguided by the clickywheel.

 

So here is the answer if anyone else wants to know:

Just press the DISP/BACK button!

 

Yep, too easy. Who would've thought. Sorry for wasting your time.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • LBAbrams
      pocket wizard and XT5?

      By LBAbrams · Posted

      Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • George_P
      Transfer X-T5 for PC wi fi...

      By George_P · Posted

      Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • grizzski
      X-T30 II Eye Sensor + LCD Image Display viewmode not working

      By grizzski · Posted

      Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • George_P
      Problem with multi exposure on XT5

      By George_P · Posted

      What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • N.Rio
      black and white (open thread)

      By N.Rio · Posted

      Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...