Jump to content

Fuji XT 1 and X100t for production stills


Recommended Posts

Full disclosure: I'm a Canon shooter with a burning desire to switch to Fuji but can't justify it yet because I shoot a lot of video too. Hopefully soon.

 

I just got an inquiry to shoot production stills of a reality series. Does anyone have experience shooting production stills on set with Fuji and can you provide any insights. If they are quiet enough it would be such a better experience than working with a blimp on my 5D mkII. I'm thinking that I'd like to rent a XT1/56mm and a x100t. I've shot with both cameras before but didn't critically notice the sound of the camera.

 

Thoughts?

 

Thanks

Chris

 

 

 

 

Link to post
Share on other sites

I've never shot production stills when a blimp was required, but...

With Silent Mode : ON  and Electronic Shutter only enabled the camera makes no sound during operation.  Very minor AF noise from the lens (tested with the 18-55) - but you could shoot MF and kill it entirely.

Link to post
Share on other sites

Yeah, I thought about the electronic shutter but a friend told me you can get some distortion with movement. In silent mode it is probably pretty quiet. 

I haven't found too much of an issue. I haven't used it shooting any serious movement, though, like sports or vehicles. The mechanical shutter of the X-T1 is still one of the more quiet I've used.

 

The leaf shutter on the X100T is essentially silent.

Link to post
Share on other sites

Another thing springs to mind: beware of lighting with the electronic shutter. Since the readout of the frame takes 1/15 second, any light flickering faster than that risk producing dark banding. I am thinking partly dimmed LED lighting. This could be an issue.

 

That said, the mechanical shutter nose is nowhere near the noise produced by my old Nikon D2hs or D3. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...